TOPへ戻る


pogoplug Series 4 のSSHを試してみる

pogoplug series4 へ SSH 接続できるように設定します。
ブラウザーで、my.pogoplug.comにアクセスして、SSHの有効化の設定を行います。



右上の▼を押して、【設定】を選択します。




セキュリティを選択して、「このPogoplug機器へのSSHアクセスを有効にする」にチェックを入れます。




SSHのパスワードの設定を聞いてくるので、入力します。




「セキュリティー・セッションをフル活用」にチェックを入れて設定完了です。





PogoplugにSSH接続するには、IPアドレスが必要なのですが、Dream Seedさんのサイトで取得方法が
書かれていますので、参考にしてみてください。
もう一つの参考サイト Pogoplugに『OpenPogo』をインストールして神格化!!


ipアドレスが分かりましたら、早速接続してみます。
ここでは、Tera Termを使用しています。



端末の設定(すみません、正しくないかも・・・動いたのでOKとしてます)




先ほど調べた、IPアドレスを入力して、SSH接続します。(※このIPアドレスは、私の環境の場合です)




ユーザー名はroot
パスフレーズ(パスワード)は、先ほど設定したパスワードを入力します。




接続できると、こんな画面になります。(プロンプトを出すために一度エンターキーを押下しています)


以下は、コマンドを適当に送ってみました。


システムの情報を表示します。
uname -a
~ # uname -a
Linux Pogoplug 2.6.31.8 #5 Wed Sep 28 12:09:12 PDT 2011 armv5tel GNU/Linux


ディレクトリ構成を表示します。
/ls -al
~ # cd ..
/ # ls -al
drwxr-xr-x   14 root     root          1000 Sep 28  2011 .
drwxr-xr-x   14 root     root          1000 Sep 28  2011 ..
drwxr-xr-x    2 root     root          4344 Sep 28  2011 bin
drwxr-xr-x    5 root     root         19088 Jan  1  1970 dev
drwxr-xr-x    5 root     root          1096 May 19 12:46 etc
drwxr-xr-x    3 root     root          2224 Sep 28  2011 lib
drwx------    2 root     root           160 Sep 28  2011 lost+found
drwxr-xr-x    2 root     root           160 Jun 10  2010 mnt
dr-xr-xr-x   45 root     root             0 Jan  1  1970 proc
drwxr-xr-x    2 root     root           160 Jun 10  2010 root
drwxr-xr-x    2 root     root          2784 Sep 28  2011 sbin
drwxr-xr-x   11 root     root             0 Jan  1  1970 sys
drwxrwxrwt    4 root     root           140 Jan  1  1970 tmp
drwxr-xr-x    7 root     root           480 Sep 28  2011 usr
lrwxrwxrwx    1 root     root             8 Sep 28  2011 var -> /tmp/var
/ #


/bin内のコマンドを表示します。
ls /bin
~ # ls /bin
ash            dmesg          hush           ls             ping           su
busybox        dnsdomainname  ionice         lsattr         ping6          sync
cat            echo           ip             lzop           ps             tar
chattr         egrep          ipaddr         mkdir          pwd            touch
chgrp          false          iplink         mknod          rm             true
chmod          fdflush        iproute        more           rmdir          umount
chown          fgrep          iprule         mount          sed            uname
cp             grep           iptunnel       mv             sh             usleep
date           gunzip         kill           netstat        sleep          vi
dd             gzip           ln             nice           stat           zcat
df             hostname       login          pidof          stty


ディスクの使用状況を表示します。
df
~ # df
Filesystem           1K-blocks      Used Available Use% Mounted on
ubi0:rootfs              99432     13224     86208  13% /
none                     59312        12     59300   0% /tmp
/tmp/.cemnt/sda1     488383484    119952 488263532   0% /tmp/.cemnt/mnt_sda1


busbox
~ # busybox
BusyBox v1.16.1 (2011-09-28 14:52:05 PDT) multi-call binary.
Copyright (C) 1998-2009 Erik Andersen, Rob Landley, Denys Vlasenko
and others. Licensed under GPLv2.
See source distribution for full notice.

Usage: busybox [function] [arguments]...
   or: function [arguments]...

        BusyBox is a multi-call binary that combines many common Unix
        utilities into a single executable.  Most people will create a
        link to busybox for each function they wish to use and BusyBox
        will act like whatever it was invoked as.

Currently defined functions:
        [, [[, arp, ash, awk, basename, brctl, bunzip2, bzcat, bzip2, cat, chattr, chgrp,
        chmod, chown, chroot, clear, cmp, cp, crond, cut, date, dd, depmod, df, diff, dirname,
        dmesg, dnsdomainname, du, echo, egrep, eject, env, expr, false, fdflush, fdisk, fgrep,
        fsck, fuser, getty, grep, gunzip, gzip, halt, head, hexdump, hostname, hush, ifconfig,
        ifdown, ifplugd, ifup, init, insmod, ionice, ip, ipaddr, iplink, iproute, iprule,
        iptunnel, kill, killall, less, ln, login, losetup, ls, lsattr, lsmod, lspci, lsusb,
        lzop, lzopcat, md5sum, mkdir, mkdosfs, mke2fs, mkfifo, mkfs.ext2, mkfs.vfat, mknod,
        modprobe, more, mount, mv, nc, netstat, nice, nmeter, nohup, nslookup, od, passwd,
        pidof, ping, ping6, pivot_root, poweroff, printf, ps, pwd, rdev, readlink, realpath,
        reboot, renice, reset, rm, rmdir, rmmod, route, sed, seq, sh, sha1sum, sleep, sort,
        split, stat, strings, stty, su, sulogin, sum, swapoff, swapon, sync, sysctl, tail,
        tar, taskset, tee, telnet, telnetd, test, time, top, touch, tr, traceroute,
        traceroute6, true, tty, tune2fs, udhcpc, umount, uname, uniq, unlzop, uptime, usleep,
        vi, wc, wget, which, who, whoami, xargs, yes, zcat, zcip


プロセスを表示する。
top
Mem: 52900K used, 65728K free, 0K shrd, 15348K buff, 22740K cached
CPU:  0.0% usr  0.0% sys  0.0% nic  100% idle  0.0% io  0.0% irq  0.0% sirq
Load average: 0.00 0.00 0.00 1/62 726
  PID  PPID USER     STAT   VSZ %MEM CPU %CPU COMMAND
  655   654 root     S    16012 13.4   0  0.0 /usr/local/cloudengines/bin/hbplug
  722   702 root     S     2224  1.8   0  0.0 /usr/sbin/dropbear -P /var/dropbear.pid
  723   722 root     S     2092  1.7   0  0.0 -sh
  725   723 root     S     2092  1.7   0  0.0 sh
  726   725 root     R     2092  1.7   0  0.0 top
  656     1 root     S     2092  1.7   0  0.0 -/bin/sh
    1     0 root     S     2088  1.7   0  0.0 init
  633     1 root     S     2088  1.7   0  0.0 udhcpc -b -i eth0 -H Pogoplug
  702     1 root     S     1996  1.6   0  0.0 /usr/sbin/dropbear -P /var/dropbear.pid
  654     1 root     S     1672  1.4   0  0.0 /usr/local/cloudengines/bin/hbwd /usr/local/
  150     2 root     SW       0  0.0   0  0.0 [pdflush]
    5     2 root     SW<      0  0.0   0  0.0 [khelper]
    2     0 root     SW<      0  0.0   0  0.0 [kthreadd]
    3     2 root     SW<      0  0.0   0  0.0 [ksoftirqd/0]
    4     2 root     SW<      0  0.0   0  0.0 [events/0]
    8     2 root     SW<      0  0.0   0  0.0 [async/mgr]
  107     2 root     SW<      0  0.0   0  0.0 [kblockd/0]
  116     2 root     SW<      0  0.0   0  0.0 [khubd]
  119     2 root     SW<      0  0.0   0  0.0 [kseriod]
  122     2 root     SW<      0  0.0   0  0.0 [kmmcd]
  143     2 root     SW       0  0.0   0  0.0 [crypto]
  144     2 root     SW       0  0.0   0  0.0 [crypto_ret]
  149     2 root     SW       0  0.0   0  0.0 [pdflush]
  151     2 root     SW<      0  0.0   0  0.0 [kswapd0]
  152     2 root     SW<      0  0.0   0  0.0 [aio/0]
  153     2 root     SW<      0  0.0   0  0.0 [nfsiod]
  154     2 root     SW<      0  0.0   0  0.0 [crypto/0]
  416     2 root     SW<      0  0.0   0  0.0 [scsi_eh_0]
  417     2 root     SW<      0  0.0   0  0.0 [scsi_eh_1]
  437     2 root     SW<      0  0.0   0  0.0 [mtdblockd]
  438     2 root     SW<      0  0.0   0  0.0 [nftld]


プロセスの状態を表示する
ps
~ # ps
  PID USER       VSZ STAT COMMAND
    1 root      2088 S    init
    2 root         0 SW<  [kthreadd]
    3 root         0 SW<  [ksoftirqd/0]
    4 root         0 SW<  [events/0]
    5 root         0 SW<  [khelper]
    8 root         0 SW<  [async/mgr]
  107 root         0 SW<  [kblockd/0]
  116 root         0 SW<  [khubd]
  119 root         0 SW<  [kseriod]
  122 root         0 SW<  [kmmcd]
  143 root         0 SW   [crypto]
  144 root         0 SW   [crypto_ret]
  149 root         0 SW   [pdflush]
  150 root         0 SW   [pdflush]
  151 root         0 SW<  [kswapd0]
  152 root         0 SW<  [aio/0]
  153 root         0 SW<  [nfsiod]
  154 root         0 SW<  [crypto/0]
  416 root         0 SW<  [scsi_eh_0]
  417 root         0 SW<  [scsi_eh_1]
  437 root         0 SW<  [mtdblockd]
  438 root         0 SW<  [nftld]
  462 root         0 SW<  [ubi_bgt0d]
  515 root         0 SW<  [usbhid_resumer]
  518 root         0 SW<  [rpciod/0]
  633 root      2088 S    udhcpc -b -i eth0 -H Pogoplug
  654 root      1672 S    /usr/local/cloudengines/bin/hbwd /usr/local/cloudengines/bin/hbplug
  655 root     16012 S    /usr/local/cloudengines/bin/hbplug
  656 root      2092 S    -/bin/sh
  702 root      1996 S    /usr/sbin/dropbear -P /var/dropbear.pid
  722 root      2224 S    /usr/sbin/dropbear -P /var/dropbear.pid
  723 root      2092 S    -sh
  725 root      2092 S    sh
  784 root      2092 R    ps


inittabの内容
/etc # cat inittab
::sysinit:/etc/init.d/rcS
::respawn:-/bin/sh
#::respawn:-/bin/sh
#tty2::askfirst:-/bin/sh
#::ctrlaltdel:/bin/umount -a -r


起動メッセージを確認する
dmesg
~ # dmesg
al
<5>[    0.000000] Memory: 118356KB available (3852K code, 261K data, 124K init, 0K highmem)
<6>[    0.000000] Hierarchical RCU implementation.
<6>[    0.000000] NR_IRQS:128
<4>[    0.000000] Console: colour dummy device 80x30
<6>[    0.000000] Calibrating delay loop... 799.53 BogoMIPS (lpj=3997696)
<4>[    0.230000] Mount-cache hash table entries: 512
<6>[    0.230000] CPU: Testing write buffer coherency: ok
<6>[    0.230000] NET: Registered protocol family 16
<6>[    0.230000] Feroceon L2: Enabling L2
<6>[    0.230000] Feroceon L2: Cache support initialised.
<4>[    0.230000]
<4>[    0.230000] CPU Interface
<4>[    0.230000] -------------
<4>[    0.230000] SDRAM_CS0 ....base 00000000, size 128MB
<4>[    0.230000] SDRAM_CS1 ....disable
<4>[    0.230000] SDRAM_CS2 ....disable
<4>[    0.230000] SDRAM_CS3 ....disable
<4>[    0.230000] PEX0_MEM ....base e0000000, size 128MB
<4>[    0.230000] PEX0_IO ....base f2000000, size   1MB
<4>[    0.230000] PEX1_MEM ....no such
<4>[    0.230000] PEX1_IO ....no such
<4>[    0.230000] INTER_REGS ....base f1000000, size   1MB
<4>[    0.230000] NFLASH_CS ....base fa000000, size   2MB
<4>[    0.230000] SPI_CS ....base f4000000, size  16MB
<4>[    0.230000] BOOT_ROM_CS ....no such
<4>[    0.230000] DEV_BOOTCS ....no such
<4>[    0.230000] CRYPT_ENG ....base f0000000, size   2MB
<4>[    0.230000]
<4>[    0.230000]   Marvell Development Board (LSP Version KW_LSP_5.1.3_patch18)-- RD-88F6192A-NAS  Soc: 88F6192 A1 LE
<4>[    0.230000]
<4>[    0.230000]  Detected Tclk 166666667 and SysClk 200000000
<4>[    0.230000] Marvell USB EHCI Host controller #0: c403e740
<4>[    0.730000] PEX0 interface detected Link X1
<7>[    0.730000] pci 0000:00:01.0: reg 10 64bit mmio: [0x40000000-0x4000ffff]
<7>[    0.730000] pci 0000:00:01.0: reg 18 64bit mmio: [0x40010000-0x40010fff]
<7>[    0.730000] pci 0000:00:01.0: reg 20 64bit mmio: [0x40011000-0x40011fff]
<7>[    0.740000] pci 0000:00:01.0: supports D1
<6>[    0.740000] pci 0000:00:01.0: PME# supported from D0 D1 D3hot
<6>[    0.740000] pci 0000:00:01.0: PME# disabled
<6>[    0.740000] PCI: bus0: Fast back to back transfers disabled
<4>[    0.740000] mvPexLocalBusNumSet: ERR. Invalid PEX interface 1
<4>[    0.750000] bio: create slab  at 0
<5>[    0.750000] SCSI subsystem initialized
<6>[    0.750000] usbcore: registered new interface driver usbfs
<6>[    0.750000] usbcore: registered new interface driver hub
<6>[    0.750000] usbcore: registered new device driver usb
<6>[    0.750000] NET: Registered protocol family 2
<6>[    0.750000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>[    0.750000] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
<6>[    0.750000] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
<6>[    0.750000] TCP: Hash tables configured (established 4096 bind 4096)
<6>[    0.750000] TCP reno registered
<6>[    0.750000] NET: Registered protocol family 1
<6>[    0.750000] cpufreq: Init kirkwood cpufreq driver
<7>[    0.750000] cpufreq: High frequency: 800000KHz - Low frequency: 200000KHz
<7>[    0.750000] cpufreq: Setting CPU Frequency to 800000 KHz
<7>[    0.750000] cpufreq: Setting PowerSaveState to off
<6>[    0.760000] XOR registered 4 channels
<6>[    0.760000] XOR 2nd invalidate WA enabled
<4>[    0.760000] cesadev_init(c000d7fc)
<4>[    0.760000] mvCesaInit: sessions=640, queue=64, pSram=f0000000
<6>[    0.760000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>[    0.770000] msgmni has been set to 231
<6>[    0.770000] alg: No test for cipher_null (cipher_null-generic)
<6>[    0.770000] alg: No test for ecb(cipher_null) (ecb-cipher_null)
<6>[    0.770000] alg: No test for digest_null (digest_null-generic)
<6>[    0.770000] alg: No test for compress_null (compress_null-generic)
<6>[    0.780000] alg: No test for stdrng (krng)
<6>[    0.780000] alg: No test for hmac(digest_null) (hmac(digest_null-generic))
<6>[    0.790000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
<6>[    0.790000] io scheduler noop registered
<6>[    0.790000] io scheduler anticipatory registered (default)
<4>[    0.790000] Initializing ths8200_init
<4>[    0.790000] Initializing dove_adi9889_init
<6>[    0.810000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
<6>[    0.810000] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A
<6>[    0.810000] console [ttyS0] enabled
<4>[    0.820000] Integrated Sata device found
<4>[    0.830000] IRQ 21/mvSata: IRQF_DISABLED is not guaranteed on shared IRQs
<6>[    0.850000] scsi0 : Marvell SCSI to SATA adapter
<6>[    0.860000] scsi1 : Marvell SCSI to SATA adapter
<5>[    1.370000] scsi 0:0:0:0: Direct-Access     Hitachi  HTS545050B9A300  PB4O PQ: 0 ANSI: 5
<5>[    1.380000] sd 0:0:0:0: [sda] Sector size 0 reported, assuming 512.
<5>[    1.380000] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
<5>[    1.390000] sd 0:0:0:0: [sda] 0-byte physical blocks
<5>[    1.400000] sd 0:0:0:0: Attached scsi generic sg0 type 0
<5>[    1.400000] sd 0:0:0:0: [sda] Write Protect is off
<7>[    1.410000] sd 0:0:0:0: [sda] Mode Sense: 23 00 10 00
<4>[    1.410000] Loading Marvell Ethernet Driver:
<4>[    1.410000]   o Cached descriptors in DRAM
<4>[    1.420000]   o DRAM SW cache-coherency
<4>[    1.420000]   o 1 Giga ports supported
<4>[    1.420000]   o Single RX Queue support - ETH_DEF_RXQ=0
<4>[    1.430000]   o Single TX Queue support - ETH_DEF_TXQ=0
<4>[    1.430000]   o TCP segmentation offload (TSO) supported
<4>[    1.440000]   o Large Receive offload (LRO) supported
<4>[    1.440000]   o Receive checksum offload supported
<4>[    1.450000]   o Transmit checksum offload supported
<4>[    1.450000]   o Network Fast Processing (Routing) supported - (Disabled)
<4>[    1.460000]   o Driver ERROR statistics enabled
<4>[    1.470000]   o Proc tool API enabled
<4>[    1.470000]   o SKB Reuse supported - (Disabled)
<4>[    1.470000]   o SKB Recycle supported - (Disabled)
<4>[    1.480000]   o Rx descripors: q0=128
<4>[    1.480000]   o Tx descripors: q0=532
<4>[    1.490000]   o Loading network interface(s):
<4>[    1.490000]      o register under mv88fx_eth platform
<4>[    1.500000]      o eth0, ifindex = 2, GbE port = 0
<4>[    1.500000]
<4>[    1.500000] mvFpRuleDb (c45b0000): 1024 entries, 4096 bytes
<4>[    1.510000] Counter=0, opIdx=6, overhead=16
<4>[    1.510000] Counter=1, opIdx=2, overhead=0
<4>[    1.520000] Counter=2, opIdx=1, overhead=18
<4>[    1.520000] Counter=3, opIdx=2, overhead=0
<6>[    1.530000] tun: Universal TUN/TAP device driver, 1.6
<6>[    1.530000] tun: (C) 1999-2004 Max Krasnyansky 
<5>[    1.540000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
<5>[    1.550000] sd 0:0:0:0: [sda] Sector size 0 reported, assuming 512.
<6>[    1.550000] NAND device: Manufacturer ID: 0xad, Chip ID: 0xf1 (Hynix NAND 128MiB 3,3V 8-bit)
<6>[    1.560000] Scanning device for bad blocks
<4>[    1.610000] Using static partition definition
<5>[    1.620000] Creating 5 MTD partitions on "nand_mtd":
<5>[    1.620000] 0x000000000000-0x000000200000 : "u-boot"
<5>[    1.630000] 0x000000200000-0x000000500000 : "uImage"
<6>[    1.630000]  sda:
<5>[    1.630000] 0x000000500000-0x000000800000 : "uImage2"
<5>[    1.640000] 0x000000800000-0x000001000000 : "failsafe"
<5>[    1.650000] 0x000001000000-0x000008000000 : "root"
<5>[    1.650000] UBI: attaching mtd4 to ubi0
<5>[    1.660000] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[    1.660000] UBI: logical eraseblock size:    126976 bytes
<5>[    1.670000] UBI: smallest flash I/O unit:    2048
<5>[    1.670000] UBI: sub-page size:              512
<5>[    1.680000] UBI: VID header offset:          2048 (aligned 2048)
<5>[    1.680000] UBI: data offset:                4096
<4>[    1.690000]  sda1
<5>[    1.690000] sd 0:0:0:0: [sda] Sector size 0 reported, assuming 512.
<5>[    1.700000] sd 0:0:0:0: [sda] Attached SCSI disk
<5>[    1.920000] UBI: attached mtd4 to ubi0
<5>[    1.930000] UBI: MTD device name:            "root"
<5>[    1.930000] UBI: MTD device size:            112 MiB
<5>[    1.940000] UBI: number of good PEBs:        896
<5>[    1.940000] UBI: number of bad PEBs:         0
<5>[    1.950000] UBI: max. allowed volumes:       128
<5>[    1.950000] UBI: wear-leveling threshold:    4096
<5>[    1.960000] UBI: number of internal volumes: 1
<5>[    1.960000] UBI: number of user volumes:     1
<5>[    1.960000] UBI: available PEBs:             0
<5>[    1.970000] UBI: total number of reserved PEBs: 896
<5>[    1.970000] UBI: number of PEBs reserved for bad PEB handling: 8
<5>[    1.980000] UBI: max/mean erase counter: 1/0
<5>[    1.980000] UBI: image sequence number: 0
<6>[    1.990000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[    1.990000] ehci_marvell ehci_marvell.70059: Marvell Orion EHCI
<6>[    2.000000] ehci_marvell ehci_marvell.70059: new USB bus registered, assigned bus number 1
<5>[    2.010000] UBI: background thread "ubi_bgt0d" started, PID 462
<6>[    2.040000] ehci_marvell ehci_marvell.70059: irq 19, io base 0xf1050100
<6>[    2.060000] ehci_marvell ehci_marvell.70059: USB 2.0 started, EHCI 1.00
<6>[    2.060000] usb usb1: configuration #1 chosen from 1 choice
<6>[    2.070000] hub 1-0:1.0: USB hub found
<6>[    2.070000] hub 1-0:1.0: 1 port detected
<6>[    2.080000] xhci_hcd 0000:00:01.0: xHCI Host Controller
<6>[    2.080000] xhci_hcd 0000:00:01.0: new USB bus registered, assigned bus number 2
<6>[    2.090000] xhci_hcd 0000:00:01.0: irq 9, io mem 0xe0000000
<4>[    2.100000] usb usb2: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor
<6>[    2.110000] usb usb2: configuration #1 chosen from 1 choice
<7>[    2.110000] xHCI xhci_add_endpoint called for root hub
<7>[    2.110000] xHCI xhci_check_bandwidth called for root hub
<6>[    2.110000] hub 2-0:1.0: USB hub found
<6>[    2.120000] hub 2-0:1.0: 4 ports detected
<6>[    2.120000] Initializing USB Mass Storage driver...
<6>[    2.120000] usbcore: registered new interface driver usb-storage
<6>[    2.130000] USB Mass Storage support registered.
<6>[    2.140000] usbcore: registered new interface driver ums-datafab
<6>[    2.140000] usbcore: registered new interface driver ums-freecom
<6>[    2.150000] usbcore: registered new interface driver ums-jumpshot
<6>[    2.150000] usbcore: registered new interface driver ums-sddr09
<6>[    2.160000] usbcore: registered new interface driver ums-sddr55
<6>[    2.170000] usbcore: registered new interface driver ums-usbat
<6>[    2.170000] mice: PS/2 mouse device common for all mice
<6>[    2.180000] i2c /dev entries driver
<7>[    2.180000] cpufreq: Setting CPU Frequency to 800000 KHz
<7>[    2.180000] cpufreq: Setting PowerSaveState to off
<6>[    2.190000] sdhci: Secure Digital Host Controller Interface driver
<6>[    2.190000] sdhci: Copyright(c) Pierre Ossman
<5>[    2.200000] mmc0: mvsdio driver initialized, using GPIO 27 for card detection
<6>[    2.210000] usbcore: registered new interface driver usbhid
<6>[    2.210000] usbhid: v2.6:USB HID core driver
<6>[    2.220000] TCP cubic registered
<6>[    2.220000] NET: Registered protocol family 17
<6>[    2.230000] RPC: Registered udp transport module.
<6>[    2.230000] RPC: Registered tcp transport module.
<4>[    2.240000] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
<5>[    2.360000] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
<5>[    2.360000] UBIFS: file system size:   110850048 bytes (108252 KiB, 105 MiB, 873 LEBs)
<5>[    2.370000] UBIFS: journal size:       9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
<5>[    2.380000] UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>[    2.380000] UBIFS: default compressor: lzo
<5>[    2.390000] UBIFS: reserved for root:  0 bytes (0 KiB)
<4>[    2.390000] VFS: Mounted root (ubifs filesystem) on device 0:11.
<6>[    2.400000] Freeing init memory: 124K
<5>[    4.470000] eth0: link up, full duplex, speed 100 Mbps
<5>[    4.470000] eth0: started
<4>[    6.060000] IRQ 93 uses trigger mode 0; requested 3
<6>[    6.070000] input: gpio-keys as /devices/platform/gpio-keys.0/input/input0
<6>[    6.080000] xce_ebtn: Pogoplug series V4 eject button initialized.
<4>[    6.220000] ufsd: module license 'Commercial product' taints kernel.
<4>[    6.230000] Disabling lock debugging due to kernel taint
<5>[    6.260000] ufsd: driver (8.6 (U86_S[2012-02-28-18:39:23]), LBD=ON, delalloc, ioctl) loaded at bf00c000
<5>[    6.260000] NTFS support included
<5>[    6.260000] Hfs+/HfsX support included
<5>[    6.260000] For 'CloudEngines_PogoPlug_2011-08-03'
<4>[    6.600000] rtusb init rt2870 --->
<6>[    6.610000] usbcore: registered new interface driver rt2870
<4>[    6.630000] Cloud Engines XCE Init [Version: 3.9.0.4]
<6>[    6.640000] XCE: CPU MEMORY MAP:
<6>[    6.640000] XCE:   -- 0x00001000 - 0xbeffffff (3055 MB)  User Space Mappings
<6>[    6.650000] XCE:   -- 0xbf000000 - 0xbfffffff (  16 MB)  Kernel module space
<6>[    6.650000] XCE:   -- 0xc0000000 - 0xc7ffffff ( 128 MB)  Kernel direct-mapped ram
<6>[    6.660000] XCE:   -- 0xc8800000 - 0xe7ffffff ( 504 MB)  Kernel vmalloc space
<6>[    6.670000] XCE:   -- 0xe8000000 - 0xfeffffff ( 367 MB)  Kernel platform space
<6>[    6.680000] XCE: CPU FEATURES:
<6>[    6.680000] XCE:   -- I Cache:         enabled
<6>[    6.680000] XCE:   -- D Cache:         enabled
<6>[    6.690000] XCE:   -- Branch Predict:  disabled
<6>[    6.690000] XCE:   -- MMU:             enabled
<6>[    6.700000] XCE:   -- Alignment Abort: enabled
<6>[    6.710000] XCE: BLPARAMS:   -- Loading properties [c4d41efc].
<6>[    6.710000] XCE: BLPARAMS:   -- MTD @ [c45ad400].
<6>[    6.720000] XCE: BLPARAMS: Locating parameter block...
<6>[    6.720000] XCE: BLPARAMS: reading 2048 bytes @ a0000
<6>[    6.730000] XCE: Loaded Property Size: 2048
<6>[    6.730000] XCE:    - 'cesvcid' -> 'UGZRQL3K3BXDWQ7MVKDECX8MAE'
<6>[    6.740000] XCE:    - 'ceboardver' -> 'PPV4A3'
<6>[    6.740000] XCE:   -- ICache Prefetch: enabled
<6>[    6.750000] XCE:   -- DCache Prefetch: enabled
<6>[    6.750000] XCE:   -- L2 Cache:        enabled
<6>[    6.760000] XCE:   -- L2 Prefetch:     disabled
<6>[    6.760000] XCE:   -- L2 Writethrough: disabled
<6>[    6.770000] XCE:   -- Write Allocate:  disabled
<6>[    6.770000] XCE:   -- Streaming:       disabled
<6>[    6.780000] XCE: Current GPIO State:
<6>[    6.780000] XCE:  GPIO L OUT:    0x01f18400
<6>[    6.780000] XCE:  GPIO L OE:     0xfe004800
<6>[    6.790000] XCE:  GPIO L BLINK:  0x00000000
<6>[    6.790000] XCE:  GPIO L POL:    0x28000000
<6>[    6.800000] XCE:  GPIO L IN:     0x11f00000
<6>[    6.800000] XCE:  GPIO H OUT:    0x00000008
<6>[    6.800000] XCE:  GPIO H OE:     0x00000005
<6>[    6.810000] XCE:  GPIO H BLINK:  0x00000000
<6>[    6.810000] XCE:  GPIO H POL:    0x00000000
<6>[    6.820000] XCE:  GPIO H IN:     0x00000008
<6>[    6.910000] XCE: BLPARAMS:   -- Loading properties [c4d41ecc].
<6>[    6.910000] XCE: BLPARAMS:   -- MTD @ [c45ad400].
<6>[    6.920000] XCE: BLPARAMS: Locating parameter block...
<6>[    6.920000] XCE: BLPARAMS: reading 2048 bytes @ a0000
<6>[    6.930000] XCE: BLPARAMS: reading 2048 bytes @ a0800
<6>[    6.940000] XCE: BLPARAMS: reading 2048 bytes @ a1000
<6>[    6.940000] XCE: BLPARAMS: reading 2048 bytes @ a1800
<6>[   12.360000] XCE: XCE: LED -> CONNECTED
<5>[   12.550000] ufsd: use builtin utf8 instead of kernel utf8
<4>[   13.160000] ufsd: sda1 without journal
<6>[ 6324.360000] XCE: BLPARAMS:   -- Loading properties [c4de7ecc].
<6>[ 6324.360000] XCE: BLPARAMS:   -- MTD @ [c45ad400].
<6>[ 6324.370000] XCE: BLPARAMS: Locating parameter block...
<6>[ 6324.370000] XCE: BLPARAMS: reading 2048 bytes @ a0000
<6>[ 6324.380000] XCE: BLPARAMS: reading 2048 bytes @ a0800
<6>[ 6324.390000] XCE: BLPARAMS: reading 2048 bytes @ a1000
<6>[ 6324.390000] XCE: BLPARAMS: reading 2048 bytes @ a1800
<6>[ 6665.090000] XCE: BLPARAMS:   -- Loading properties [c4e2fecc].
<6>[ 6665.100000] XCE: BLPARAMS:   -- MTD @ [c45ad400].
<6>[ 6665.100000] XCE: BLPARAMS: Locating parameter block...
<6>[ 6665.110000] XCE: BLPARAMS: reading 2048 bytes @ a0000
<6>[ 6665.110000] XCE: BLPARAMS: reading 2048 bytes @ a0800
<6>[ 6665.120000] XCE: BLPARAMS: reading 2048 bytes @ a1000
<6>[ 6665.130000] XCE: BLPARAMS: reading 2048 bytes @ a1800

2012/05/19 第1版